Selecting a Destination Class and Classification Flags

About the Destination Class

The destination class defines the class value that points are set to when the points fit a defined plane. If the destination class is included in the point filter, it is automatically removed at the time the task is executed on point cloud data. 
Learn more about the Input Points Filter

The Destination Class dialog will also allow you to set classification flags for the points here.

How to Modify the Destination Class

Destination Class Button

1. Define a Point Cloud Task as described in their respective property page.
2. On the Point Cloud Task property page, press the Destination Class button . 

3. 

4. Within the Destination Class dialog, select the Classification in the list you wish to set points to when executing the task. Apply any applicable flags to the destination class. Select OK.
5. Press the 'Apply' button to commit the change to the Point Cloud Task.

How To Modify Destination Class Flags

1. Define a Point Cloud Task as described in their respective property page.
2. On the Point Cloud Task property page, press the Destination Class button .
3. In the Destination Class dialog (Figure 1), set the flags to Ignore (no change), Set (to enable the flag), or Clear (to remove the flag). Select OK.
4. Complete the setup of the Point Cloud Task and press Apply.