RESEPI Tab

Requires an LP360 Drone license.

The RESEPI tab in LP360 brings together commands for importing sensor data, processing it, editing features, and working with imagery. The reference below is organized by ribbon group and links each documented button to its corresponding tool or feature article. The published Wingtra/Other Tab article is the available reference for the button inventory and layout; confirm the exact buttons and icons shown in the RESEPI ribbon screenshot before publication.

RESEPI Processing uses the PCMasterProGL engine to process the trajectory and geocode LiDAR data, with options for laser filtering and photo processing. For detailed wizard settings, see RESEPI Processing. For the complete workflow, see EchoOne & RESEPI Sensors Processing Workflow.

Screenshot placeholder: Insert a screenshot of the full RESEPI tab in the LP360 ribbon here before publishing. Verify the displayed button names and icons against this reference.

Figure 1: RESEPI tab in the LP360 ribbon.

Displaying the Tab

The RESEPI Tab will appear in the ribbon if you Import a Cycle from a RESEPI payload. 

To show or hide ribbon tabs, open Options > Customize Ribbon Menu. A checkmark next to a tab name indicates that the tab is displayed. See Customize Ribbon Menu for details.

Ribbon Buttons

The ribbon is organized into the following groups. Select on the tool name to open its tool article.

Import

Tool Icon	Tool	Description
	Cycle Import	Import the sensor acquisition into an LP360 project as a Cycle.
	Add Photo Layer	Add georeferenced photos to a project photo layer.

Processing

Tool Icon	Tool	Description
	Auto Create Flight Lines	Automatically create flight lines for a Cycle.
	RESEPI Processing	Configure RESEPI trajectory processing, geocoding, laser filters, and photo processing with the PCMasterProGL engine.
	Post Processing	Prepare the processed dataset for downstream work, including creating trajectory files and cutting LAS data by flight line.
	Strip Align	Adjust alignment between overlapping flight lines. Requires a Strip Align add-on license for LP360 Drone.
	Agisoft Ortho Mapping	Use Metashape to create orthomosaics and/or point clouds from photos and add the results to the project.
	Ortho Mapping	Process imagery to create orthomosaic products in LP360.
	Colorize by Image	Colorize point cloud data from a raster layer, typically an orthomosaic.

Job

Tool Icon	Tool	Description
	Job Manager	Monitor submitted processing jobs and complete finished jobs to add their results to the project.

Feature Edit

Tool Icon	Tool	Description
	Manual Flight Lines	Create or edit flight lines manually from selected trajectory points.
	Select/Edit Features by Lasso	Select features within a freeform lasso for editing.
	Delete Selected Features	Delete selected features or vertices.
	Select/Edit Features	Select and edit individual features.
	Undo / Redo Feature Edits	Undo or redo feature editing actions.
	Discard Feature Edits	Discard pending feature edits in the current edit session.
	Select/Edit Features by Polygon	Select features within a polygon for editing.
	Save Feature Edits	Save pending feature edits.

Images

Tool Icon	Tool	Description
	Image Explorer	Select a point and view images that contain that point.

Best Practices

• Verify the selected Cycle, correction source, coordinate reference information, and GNSS lever arm offsets before processing.
• For PPK, confirm that the base observation files cover the entire Cycle and that the correct base station location is selected.
• Review the 3D Distance and Rotation Angle filters; the RESEPI Processing article recommends using these filters.
• Use Standard colorization for most projects and enable Update Photo EXIF Tags when processing photos.
• Review overlapping flight lines for alignment quality before creating final deliverables.

For the complete processing sequence, including flight line creation, control point tools, classification, imagery products, and export, see EchoOne & RESEPI Sensors Processing Workflow.