Executing Agisoft Ortho Mapping on Another Machine

The recommended workflow should you wish to process your Cycles to a colorized point cloud on one machine, but generate your orthomosaic on a different machine, is to process all Cycles for your project on machine A. Then,

1. Export an Explorer Package from machine A containing all the desired RetainedPhotos layers and a single DEM layer (for 3DIS®) to be used for generating the orthomosaic.
2. Copy the Explorer Package to machine B.
3. On machine B, open the Explorer Package to create a new project.
4. Run Agisoft Ortho Mapping on machine B to generate your orthomosaic, and the optional point cloud (for 2DIS).
5. In the Job Manager , Complete the Agisoft Ortho Mapping job to add the orthomosaic, and optional point cloud (for 2DIS) to the project on machine B.
6. On machine A, import the following from their folder locations on machine B into your existing project:
   1. Orthomosaic – UNC path as specified in the Agisoft Ortho Mapping completion e-mail. Use the Add Files -> Raster tab.
   2. The updated True Pose® photos from the RetainedPhotos layer(s) – Right-click on the layer in the project on machine B, select Open Location in Explorer to determine the path to photos. They are in subfolders of the parent folder to the feature file. Recall only the retained photos were copied to machine B so you can import all photos found here. Use the Add Files -> Photo tab.
   3. optional point cloud (for 2DIS) – UNC path as specified in the Agisoft Ortho Mapping completion e-mail. Use the Add Files -> LAS tab.
7. Use the new True Pose® photos layer as the drive for Image Explorer by deselecting any other layers IE column in Project Manager and only enabling the new layer.