If using LP360 for ArcGIS, your system should meet all requirements of your licensed ESRI™ software, but in all cases, including True View EVO, your system should be no less than:
Computer and Processor: | PC with a Pentium™ processor or equivalent, 2.2 GHz minimum; Hyperthreading or Multi-core recommended.
i7 or equivalent CPU. The more cores, the faster the processing |
Memory: | 16 GB of RAM or more recommended. |
Hard Disk: |
A minimum capacity of 256 GB SSD is recommended. 2.4 GB of available hard disk space. Additional space will be required for data storage. Secondary storage recommended but not required (e.g. 2 TB spinning disk) |
Drive: | USB Interface port. USB 3.0 interface port recommended. For transfer from the TrueView USB Mass Storage (TrueView USB memory stick) |
Display: |
Super VGA resolution (1920 x 1080) or higher with 256 colors or better. High resolution, 4k displays, require configuring EVO shortcut properties per Microsoft’s recommendations. Dual Display highly recommended for office setups |
Video Card: |
Open-GL version 4.5 runtime minimum capable video card with 64 MB of memory required, 256 MB or greater recommended. Nvidia Graphics recommended but not required |
Operating System: | Windows 10 (32-bit and 64-bit), Windows 11 (64-bit), and their server equivalents (Windows Server 2022 for Windows 11).*** .NET Framework 4.8 and above. |
ESRI Software: | ArcGIS™ Desktop 10.3.1 or above. ArcGIS 10.8.1 recommended. Any license level. |
License Server and Floating/Concurrent Licensing: |
TCP/IP network card |
Network |
High speed network access required for LP360 Cloud processing (cloud processing of the trajectory is the only mode supported for subscription systems) |
For minimum ESRI™ system requirements please refer to the following: http://desktop.arcgis.com/en/arcmap/latest/get-started/setup/arcgis-desktop-system-requirements.htm
***Windows 10 support for ESRI begins at ArcGIS 10.3.1, LP360 for Windows is fully supported on Windows 10. Microsoft Windows 11 is supported on ArcGIS 10.8.1 and ArcGIS 10.8.2 only.***
Comments
0 comments
Please sign in to leave a comment.