How to process Insta360 with the TrueView GO in LP360

This article explains how to process the Insta360 panoramic camera with the TrueView Go in LP360. It is recommended to check the TrueView Go hardware users guide for more details on how to use the TVGO.

Check the article on How to use the Insta360 with the Trueview Go to learn more about the sensor setup and the camera settings.

1. Preparing the cycle with the Insta360

After acquisition:

1. Power off the camera and TVGO before copying data.
2. Connect the TVGO device to a computer.
3. Locate the project folder under ALPHA_ALL and copy it.
4. Copy the .insv files from the camera’s storage.
5. Paste the .insv files into the TVGO project directory under:
   IMG\Camera4

Tip: If you do not know what file matches with cycle. Inside the camera4 folder check the file:
@@2025-10-06-140827_Camera4.txt
Inside this file you will find the exact name of the Insta360 file.
 

2. How to Process the Insta360 data in LP360

It is the same workflow as the TrueView Go, however during SLAM Processing the "Street View" option will be available. It is recommended to check the TrueView GO Processing article to learn more. In the following section there is a summary of the steps required. It requires a LP360 v2025.2 or newer.