When running LP360 (formerly TrueView EVO) and Applanix POSPac some antivirus, firewall, and other defender style software may interfere with processing and cause processing exceptions or slow license check in, or processing times. It is recommended to provide exceptions for programs located in the following folders:
LP360
- %CommonProgramFiles%\LP360 (read/execute)
- %ProgramFiles%\LP360\
- %ProgramData%\LP360\ (modify/read/execute/write)
- %ProgramData%\Reprise\ (modify/read/execute/write, if using perpetual licenses)
- %AppData%\LP360\ (Full control)
- %ProgramFiles%\Applanix\ (read/execute)
- %CommonProgramFiles%\Applanix\ (read/execute)
- %AppData%\POSPacCloud\ (modify/read/execute/write)
- %ProgramFiles(x86)%\GeoCue Group\ (only if TrueView EVO is installed)
- %ProgramFiles(x86)%\Common Files\LP360\ (if LP360 for ArcMap is also installed)
- %ProgramFiles(x86)%\LP360\ (if LP360 for ArcMap is also installed)
Applanix POSPacCloud
POSPacCloud should always be installed with LP360 to support a growing list of tools, so include exceptions for:
- %ProgramFiles%\Applanix
- %CommonProgramFiles%\Applanix
- %AppData%\POSPacCloud
POSPacCloud does need to be able to communicate through any firewalls with the following domains (different subdomains):
*.pospaccloud.com
*.trimble.com
*.trimblepaas.com
“%Program Files%\Applanix\POSPac Cloud\POSPacCloud.exe” needs to be able to communicate both inbound and outbound through any firewalls.
Applanix POSPac
If POSPac UAV or POSPac MMS desktop is installed, also include exceptions for:
- %ProgramFiles%\Applanix\ (read/execute)
- %CommonProgramFiles%\Applanix\ (read/execute)
- %ProgramFiles(x86)%\Applanix\ (read/execute)
- %ProgramFiles(x86)%\SafeNet Sentinel\ (read/execute)
- %ProgramData%\Applanix\ (modify/read/execute/write)
- %AppData%\Applanix\ (modify/read/execute/write)
-
Exceptions will also need to be made to allow for the download of the ephemerides through the firewall to communicate with the services list in the %ProgramFiles%\Applanix\ POSPac UAV x.x\ EphemDataServices.ini file.
-
In the Windows Defender Firewall Advanced settings add the following Outbound rules:
- Allow the program “C:\Program Files (x86)\Applanix\SoftwareLicenseUtility\Applanix.SoftwareLicenseUtility.exe”
- Allow TCP port 5093
- Allow UDP port 5093
-
In the Windows Defender Firewall Advanced settings add the following inbound rules:
- Allow the program “C:\Program Files (x86)\Applanix\SoftwareLicenseUtility\Applanix.SoftwareLicenseUtility.exe”
- Allow TCP port 5093
- Allow UDP port 5093
Strip Align
If Strip Align is licensed, also include exceptions for:
- %LocalAppData%\StripAlign\ (Full Control)
- LP360 Strip Align licensing also requires an open HTTPS port (443) to ls65.rlmcloud.com [52.9.236.200] to complete the license validation unless an offline activation has been provided.
Agisoft Ortho Mapping
If Agisoft Ortho Mapping licensed, activation of the Agisoft Metashape console node-locked license uses standard HTTPS protocol (via default system TCP port) and access to activate.agisoft.com [51.250.32.188] is required.
The backend payload management is done via communication with TrueView Reckon for maintaining calibrations and analyzing Cycle and system logs. If your payload is managed by Reckon, also include exceptions for:
- airgon.net [54.172.67.168]
LP360 Online
If LP360 Drone subscription or LP360 Online is in used. LP360 Online uses dynamic IPs that can change at any time. List of domains and subdomains. They use both TCP ports 80 and 443, the standard and secure ports for internet browsing traffic. Also include exceptions for:
- checkout.lp360.com
- store.lp360.com
- portal.lp360.com
- cloud.lp360.com
- powersearch.online.lp360.com
- lp360.com
- psc-api.online.lp360.com
- accounting.online.lp360.com
- api.microdrones.com
- microdrones.com
- *.microdrones.com
- *.lp360.com
- *.online.lp360.com
- backend-dot-lp360-cloud.uc.r.appspot.com
- backend-dot-lp360-shop.uc.r.appspot.com
For jobs in the Job Manager, and a few other functions in LP360, e-mail notifications are sent from LP360Notification@geocue.com to the notification e-mail address configured in Project Settings -> Global -> LP360 Email Notification Settings using the smtp client, smtp2go.com. SMTP2Go uses dynamic IP addresses, so the sub domains of smtp2go.com and associated domains will also need to be allowed for the notifications to be sent.
- *.smtp2go.com
- *.linodeusercontent.com
Comments
0 comments
Please sign in to leave a comment.